UltraBip 1st-generation update (pre-2026): BipLink compatibility
How to update my device to make it compatible with the BipLink app, step by step:
Download the firmware below
Connect the UltraBip to your computer using a USB-C DATA cable (device switched off)
If Windows displays "Scan and fix", click on "Continue without scanning".
Following Windows' recommendation would delete files that are essential to the operation of UltraBip
Place the downloaded file in the root directory of the UltraBip, using the file explorer or finder.
Click on 'Eject'.
Still connected by USB, press the UltraBip button once, and wait for confirmation.
Wait until the LED lights up a steady green, then the victory tune will play
The update is now complete!
Future updates will be carried out via Bluetooth using BipLink
If necessary, think about update your voicepack.
ℹ️ The vario is silent on the ground by default: you need to take off for the vario to activate. (alternatively, changing the volume will activate the vario)
Do you need help?
Click here to go to the voice pack download page.
There must always be at least one language pack in the "voices" folder.
If you encounter any difficulties, you can enter advanced recovery mode using the following procedure:
- Connect the device via USB to a computer
- Press the button for 30s
- Download this file
- Place the file at the root of the device
- Leave the device connected until it stops flashing, then click "Eject".
- Still connected via USB, switch on the device and wait until the LED lights up solid green, followed by the victory melody.
- You can now install the latest firmware version
For more information, consult the FAQ.